Building Energy Resilience

Ideas to fuel a sustainable built environment

3 min read

Energy Benchmarking for a Healthcare Network

By Katie Mason on Jan 21, 2015 5:00:00 AM

In a previous blog post, Jennifer Chiodo discussed why energy benchmarking is beneficial for everyone, whether it’s for a residential building or a commercial building. Benchmarking allows you as the building owner to not only understand how your building is doing from an energy standpoint over time, but it also compares the building to other similar buildings in its class. Using the Energy Star Portfolio Manager online benchmarking tool, you can monitor a building’s energy usage over time by setting goals and comparing the overall energy use intensity to a baseline year.

Topics: Standards and Metrics Building Performance & Technology Healthcare
3 min read

HVAC and the Aircraft Cabin Environment at 30,000 Feet

By Ben Fowler on Dec 24, 2014 5:00:00 AM

With the holiday season in full swing and airline travel at one of its annual peaks, I thought I’d take the opportunity to geek-out on the subject of HVAC systems on commercial airplanes.

Topics: Standards and Metrics Building Performance & Technology
4 min read

Controlling Operating Room Temperature and Humidity, and Managing Expectations

By Brent Weigel on Dec 17, 2014 5:00:00 AM

Proper ventilation, airflow, temperature, and humidity are needed for successful surgical operations. The design requirements for these parameters in healhtcare settings are defined by ASHRAE Standard 170, and are generally straightforward. However, OR (operating room) users often try to operate OR HVAC (heating, ventilating, and air conditioning) systems at temperatures and humidity levels outside of the standard design range. A better understanding of OR HVAC parameters would help OR designers and users achieve more effective OR functionality.

Topics: Building Cx & Design Review Building Performance & Technology Healthcare
5 min read

Wireless Technology Infiltration into HVAC Automation

By Rick Stehmeyer on Dec 10, 2014 5:00:00 AM

Wireless networks are everywhere in 2014. I have on my person 3 wireless networks happening at any given moment (4G LTE, Bluetooth, and Wi-Fi). I am a walking source of radio everywhere I go. And this is only the beginning. As more wireless devices proliferate for personal and commercial use, the spectrum will only grow more crowded and complicated. Are you prepared as wireless technology penetrates the HVAC automation market? Do you understand how radio propagates with respect to data and networks? I hope to scratch the surface and share some of this with you in the following paragraphs.

Topics: Standards and Metrics Building Performance & Technology
3 min read

Testing an Emergency Power System for a Data Center

By Katie Mason on Dec 3, 2014 5:00:00 AM

For a recent commissioning project, part of our scope of work was to test an emergency power system for a data center. Because this data center was a very important part of the client company’s work, the system and all components needed to work as intended by the design, and it was crucial that it be tested with all aspects involved before the data center was utilized. This was to ensure there would be no loss of power to the data center servers if any issues were identified. In order to properly test this mission critical system, we not only needed to understand how each component worked, but we also needed to put together full testing documents that included the relationship between all of the components. To make the entire process more fluent, we suggested a coordinated effort for creating documents and testing the system.

Topics: Building Performance & Technology
2 min read

The Importance of HVAC Preventive Maintenance

By Walker Calderwood on Nov 26, 2014 5:00:00 AM

Despite my relatively short amount of time working in the building commissioning field, I have been able to witness firsthand the serious consequences resulting from a lack of HVAC preventive maintenance (PM) in a facility. From dirty filters and coils to broken outside air dampers, lack of PM can lead to premature equipment failure, poor indoor air quality, an assortment of other problems, and usually increased energy and maintenance costs for a building owner. Indeed, it can be challenging for a facilities team to stick to a preventive maintenance plan after they have fallen into a reactive maintenance mode, but the advantages of a more proactive approach can be beneficial to everyone on the facilities team, as well as the building owner.

Topics: Building Performance & Technology
3 min read

Metering Dollars Well Spent: Sizing a Replacement Chiller

By Ben Fowler on Nov 5, 2014 5:00:00 AM

Replacement Chiller Needed – But What’s the Cooling Load?

We were hired recently by a commercial customer to work on the replacement of a ~120 ton chiller plant dating back to at least the 1980s. When we were brought on board, the plan was to install a 165 ton chiller to replace the existing unit. The facility had no building management system (DDC) and therefore the owner didn’t have the ability to accurately assess the building’s actual cooling load. In our experience, many customers in our area who do not have process loads actually have had cooling loads come down over the past 20 years. This trend is likely due to reduced lighting waste heat resulting from lighting efficiency upgrades and improved windows (low-e). We decided it may be a good idea to meter the plant to determine actual loads before sizing the new chiller plant.

Topics: Energy Efficiency Building Performance & Technology
3 min read

Is It a Heat Pump, Boiler or Furnace? – A Case for Engineer/Social Scientist Collaboration on Market Research

By Jennifer Chiodo on Oct 29, 2014 6:00:00 AM

Who knows technology?

I should know better than to presume anything when someone is speaking about their “furnace,” because what they most frequently mean is “the thing that makes heat.” I was recently asked about a home heater replacement by a relative who is the chief engineer at a major communications company. His question was, “should I replace my furnace to save energy?” I inquired about the efficiency and he replied 88%, which is pretty good for an oil-fired furnace, so I told them that was probably the best they could do. Then I was asked, “what about our hot water heater?,” which was described as “a tankless type fed off the furnace.” At that point I realized that my friend wasn’t using accurate language and that was causing me to give him bad advice. He in fact has a high-mass oil boiler with an indirect fired hot water tank, and since the boiler is near the end of its useful life, he does have an opportunity to replace it with a higher performance boiler.

Topics: Public Policy Building Performance & Technology
3 min read

Performing a Water Consumption Analysis (Part 2)

By Katie Mason on Oct 15, 2014 6:00:00 AM

In a previous blog post, I discussed our process for constructing a scope of work to perform a campus water consumption analysis. At the time, we knew a minimal amount about the existing metering system. A site visit was conducted to allow us to put our eyes on each meter listed for the campus. After this was completed, we were able to provide helpful information to our client regarding the current water consumption and metering system as well as next steps for reducing their consumption using a greater level of water use monitoring.

Topics: Standards and Metrics Building Performance & Technology
2 min read

Is a Cold Weather Heat Pump Right for Your Building?

By Walker Calderwood on Oct 8, 2014 6:00:00 AM

Before joining Cx Associates I worked as a sales engineer in western New York, with a specialty in Variable Refrigerant Flow and Ductless Split systems. With the new popularity of these systems across the country there are still many questions facilities managers, engineers, and contractors have regarding their cold weather performance. There are several important aspects of these systems to keep in mind before deciding whether they are right for your facility or project that requires cold weather heating.

Topics: Building Performance & Technology

Featured